RoofRangeBaseRoofing cost calculator
“Roofing” wording usually means the trade as a whole — installed systems, not a DIY pack of shingles from the aisle. This roofing cost calculator uses the same size × material × optional tear-off engine as roof cost calculator, with copy aimed at people comparing how much roofing costs as a project. Asphalt mid about $500 per square and metal mid about $1,000 (as of 2026-07) are the planning anchors before tear-off and pitch shove the total. Tear-off defaults off here so a clean-deck “roofing” line stays distinct from replacement defaults. Turn it on when old covering actually comes off — mid removal about $150 per square. Math stays in your browser; written local scope still governs signing.
Runs in your browser No signup Estimate only — not a contractor quote
Tear-off
Remove existing roof before install
Low
$7,000
Mid
$10,000
High
$14,000
When to use — and when not to
When to use
Bid packets say “roofing” not “roof.” Sanity-checking a remodel budget line labeled roofing before you commit allowance dollars.
When not to
You want replacement narrative with tear-off front and center → roof replacement cost calculator. Materials-only bundle counts → not this site.
Assumptions
Installed bands as of 2026-07; tear-off optional (default off on this page). Asphalt $350 / $500 / $700; metal $700 / $1,000 / $1,400; flat $500 / $800 / $1,200 per square.
Worked examples
20 squares asphalt, tear-off off
Mid ≈ 20 × $500 = $10,000
Clean deck or allowance math often starts here.
Same 20 squares with tear-off on
Mid ≈ 20 × ($500 + $150) = $13,000
Tear-off toggle adds $3,000 mid on this size — more than many headlines admit.
How it calculates
roofing ≈ squares × material_$ (+ tearoff_$ when enabled)
Roofing project band — installed $/square, tear-off only when you enable it.
- Enter roof surface squares or sq ft.
- Pick asphalt, metal, or flat for the installed system.
- Toggle tear-off on for redo paths; leave off for new deck or overlay plans you trust.
- Read low / mid / high — compare bids against mid, keep high for steep or complex jobs.
Common traps
- Ad roofing prices may be per-square materials-only — ask “installed?”
- Labor varies by pitch — see roofing labor cost per square for unit talk.
- Sites asking for a phone number are lead gen — we do not.
Next tool
Short primary → roof cost calculator.
Estimator synonym → roof cost estimator.
Per square deep-dive → roofing cost per square.
FAQ
Multiply squares by installed $/square — asphalt mid about $500 per square in our 2026-07 table, metal mid about $1,000. A 20-square asphalt job lands near $10,000 mid without tear-off, $13,000 with mid tear-off.